1/4 Inch SS201 Welded Wire Mesh: Specifications, Applications, and Buying Guide
1/4 inch SS201 welded wire mesh is made by resistance-welding stainless steel wires at right angles to form a square grid. Its nominal opening is 0.25 inch, equivalent to 6.35 mm. It can suit applications that need a relatively small, regular opening and stainless steel construction, provided SS201’s corrosion performance is appropriate for the environment. Before ordering, confirm wire diameter, opening tolerance, sheet or roll dimensions, finish, and intended service conditions.
Please visit our website for more information on this topic.
At Shunqiang Wire Mesh, we help B2B buyers turn a general mesh description into a purchase-ready specification. The opening size alone does not define the finished product: wire diameter, edge condition, dimensions, and fabrication requirements also affect fit and use. This guide explains what to evaluate and what information to include in an inquiry.
Who This Guide Is For
This guide is for importers, distributors, fabricators, and project buyers comparing 1/4 inch SS201 welded wire mesh for an identified application. It is useful when a drawing, sample, or project description calls for a small-opening stainless welded grid but leaves some purchasing details open. It can also help buyers decide whether SS201 is a sensible material choice before requesting a quotation. Final suitability should be checked against the actual environment and applicable project requirements.
What the Product Specification Means
Opening and wire arrangement
“1/4 inch” normally refers to the nominal clear opening between adjacent wires, not the distance from the center of one wire to the center of the next. The nominal opening converts to 6.35 mm because 1 inch equals 25.4 mm. Since wire diameter affects the grid’s pitch and open area, buyers should state whether the requested opening is clear opening or center-to-center spacing.
Welded mesh is produced by joining crossing wires at their intersections, creating a fixed grid rather than a woven pattern. The wire diameter is a separate specification and should not be inferred from the opening size. A thicker wire can make the mesh more rigid, but it also changes the overall dimensions of the grid and the proportion of open area.
SS201 material
SS201 is a stainless steel grade in the 200 series, commonly described as a chromium-nickel-manganese austenitic stainless steel. Buyers often consider it when cost, formability, and stainless construction are relevant to the project. However, “stainless” does not mean corrosion-proof in every service condition. Exposure to chlorides, chemicals, moisture, cleaning agents, or outdoor conditions should be assessed before selecting the grade.
Specifications to Confirm Before Ordering
A complete inquiry should define more than “1/4 inch SS201.” Use the table below as a checklist, and request written confirmation of the agreed values on the quotation or order document. If your project uses a drawing or sample, provide it so the supplier can identify any dimensional details that a short description may not capture.
| Specification | What to confirm | Why it matters |
|---|---|---|
| Opening | Nominal 1/4 inch (6.35 mm); clarify clear opening or pitch | Defines the grid spacing and whether it matches the design |
| Wire diameter | Required diameter, unit, and any permitted tolerance | Affects rigidity, weight, open area, and fit |
| Product dimensions | Sheet or roll format, width, length, and edge requirements | Supports cutting, installation, and packaging plans |
| Material | SS201 grade requirement and any material documentation needed | Helps align the supplied product with project requirements |
| Finish and fabrication | Surface condition, cut edges, and any additional processing | Clarifies handling and downstream fabrication expectations |
| Quantity and packing | Order quantity, packing method, and destination | Enables an accurate commercial and shipping quotation |
Applications and Material Fit
The small, regular grid can be considered for partitions, guards, screens, equipment covers, and fabricated components where the specified opening and wire diameter meet the design need. It may also be evaluated for general-purpose separation or screening in controlled environments. These are potential uses, not a guarantee of performance: load, impact, temperature, hygiene requirements, and exposure conditions can change what specification is appropriate.
For environments with corrosive chemicals, frequent salt exposure, or demanding outdoor service, ask an engineer or materials specialist to review the grade against the operating conditions. SS201 may not be the right choice for every application. Where corrosion resistance is a primary requirement, compare appropriate alternative stainless grades and verify the choice against project specifications rather than relying on the grade name alone.
A Practical Selection Framework
-
Define the job. Describe what the mesh must contain, separate, protect, or support. Note whether the panel is decorative, a guard, a screen, or a functional component, and identify any load or safety requirements that apply.
If you want to learn more, please visit our website Shunqiang Wire Mesh.
-
Check the opening requirement. Confirm whether 1/4 inch means the clear opening or a stated wire spacing. If the mesh must retain a particular particle or object, check the actual opening and tolerance with the supplier rather than relying on a rounded nominal description.
-
Select wire diameter and format. Specify wire diameter separately, then define sheet or roll dimensions, edge treatment, and any cutting needs. If the mesh will be framed, welded into an assembly, or trimmed on site, share the available installation dimensions before production.
-
Review the service environment. Provide details about moisture, cleaning, chemicals, temperature, and indoor or outdoor use. These conditions help determine whether SS201 is suitable or whether another material should be considered.
-
Approve a documented specification. Ask for the agreed material, opening, wire diameter, dimensions, quantity, finish, and packing to appear in the quotation or order confirmation. For a critical fit, discuss sample or inspection options before placing the full order.
Pricing, MOQ, and Lead Time
There is no reliable universal price for 1/4 inch SS201 welded wire mesh because the quotation depends on the complete specification and order details. Wire diameter, mesh dimensions, quantity, fabrication, packing, and shipping destination can all affect the offer. Minimum order quantity and production lead time also depend on the requested format and current production schedule.
To receive a useful quotation, send the opening, wire diameter, material grade, sheet or roll dimensions, quantity, finish requirements, delivery destination, and target delivery date. If one specification is flexible, identify the acceptable range instead of leaving it undefined. This gives the supplier a clear basis to confirm feasibility and explain any cost or lead-time trade-offs.
Supplier Evaluation Checklist
Evaluate suppliers by how clearly they can confirm the specification, not only by the initial unit price. Ask whether they can manufacture the requested opening and wire diameter together, provide the required dimensions, and describe how the product will be packed. Request relevant material or inspection documentation when your project requires it, and confirm what documents are available before ordering.
Also clarify communication and order-control details: how revisions are approved, how tolerances are recorded, and how changes to quantity or delivery affect the quotation. A supplier should be able to identify unresolved details rather than treating assumptions as confirmed requirements. These checks help reduce avoidable differences between the requested mesh and the delivered product.
Key Takeaways and Next Steps
1/4 inch SS201 welded wire mesh has a nominal opening of 6.35 mm, but that figure alone is not a complete buying specification. Confirm whether the opening is clear or center-to-center, specify wire diameter and dimensions, and assess SS201 against the actual service environment. Price, MOQ, and lead time should be confirmed against the full order details rather than assumed in advance.
To move forward, prepare a drawing or specification sheet if available and include your application, quantity, dimensions, and delivery destination. Shunqiang Wire Mesh can review the information, clarify open specification points, and provide a quotation based on the requested product and order conditions. Contact our team with your requirements to discuss whether this mesh is a practical fit for your project.

Comments
0