What can steel grating be used for?

Steel grating can be used for mezzanines, walkways, catwalks, stairs, and trenches.

You can find more information on our web, so please take a look.

What are the different types of grating?

There are four main types of grating that are the most popular. These do not include heavy duty grating types. The four main types are 19W4, 19W2, 15W4, 15W2.

Is grating available in different finishes?

The different types of finishes you can get grating in are plain carbon (mill finish), painted black, galvanized, stainless, aluminum and fiberglass.

How to Measure Grating

In an instructional video, Mike Anderson with Steel Cities Steels will provide a step-by-step method for measuring grating. Please refer to How to Measure and Order Steel Grating, Part 2, to watch the video.

How to measure grating:

1. Measure the bearing bar depth.
2. Measure the bearing bar thickness.
3. Determine the type of grating by measuring the bearing bar spacing and cross rod spacing. Both are measured center to center.
4. If cut to size, is banding required?
5. Determine the finish-plain, painted black, galvanized, stainless, aluminum or fiberglass.
6. Span-determine the direction of the bearing bars. The bearing bars go across the width of a trench or across structures for support.
7. Is a full panel required? Full panels are typically available in 2’x20, 2’x24’, 3’x20’, 3’x24.’
8. If not a full panel, the cut to size dimensions or fabricated sketch

Common Questions and Answers on Steel Grating

At Steel Cities Steels, our team of sales professionals are available to answer all your questions on how to measure and order steel grating. In How to Measure and Order Steel Grating, Part Three, you can watch a video to answer some of these questions. But here are some of the more common questions and answers to help you.

When placing an order, additional information may be needed:

• Is the surface of the grating smooth or serrated?
• Do you need saddle anchor clips to tack the grating down?

When is grating needed/replaced?

• When current material is rusted, corroded, or bowed
• New construction
• Outages, safety inspections or plant upgrades

How is grating sold?

• Full panels
• Cut to size
• Or Fabricated

Steel Cities Steels can help measure and order steel grating for you.

• We will happily offer guidance to quote or place an order.
• We offer onsite measurement.
• We offer onsite identification of material.
• We can offer help by or to answer your questions.
• We can provide worksheets with product information.

Give us a call if you need help measuring or identifying grating. We can help you with your project to make it stress free!

Steel Cities Steels team of sales professionals are readily available to assist you!

Mike Anderson, Vice President of Sales

219-916-

Metal Bar Grating is the workhorse of the industrial flooring market and has served industry for decades. Strong and durable with an exceptional strength-to-weight ratio, metal bar grating can be easily fabricated to nearly any configuration. The high percentage of open area makes bar grating nearly maintenance free and all products are fully recyclable.

Manufactured by assembling a series of equally spaced metal bars to connecting cross members, bar grating is available in three popular materials; mild carbon steel, series aluminum and 300 series stainless steels. Additionally, Interstate Gratings can produce gratings constructed with other specialty metal alloys. Get in touch with us to discuss your situation.

The load tables on the pages within this website provide load/deflection criteria for most common applications. These tables provide a concise reference allowing the specifying authority to select the appropriate bearing bar size and spacing for the intended application. Pedestrian loads are commonly analyzed with uniform and concentrated loads. For pedestrian comfort, deflection is typically limited to 1/4″. Heavy duty and vehicular load tables are presented for specific load conditions. Heavy duty load tables are presented with deflection limited to the lesser of 1/8″ or L/400. If your application is not addressed by the load tables found in this website, please contact Interstate Gratings. We will gladly discuss the merits of our diverse products and assist in selecting the product most appropriate for your application.

Steel grating is usually provided with bare steel (no finish), painted with one coat of IG ECOCOAT™ or other special paint finishes, or hot dip galvanized in accordance with ASTM A-123. Aluminum products are commonly supplied mill finish but they are also available with optional chemically cleaned or anodized finishes. Due to discoloration that occurs during welding and fabrication, Stainless Steel grating products typically require secondary cleaning.

IG ECOCLEAN™, abrasive blasting, and passivation provide a uniform and clean surface. All grating products can be provided with specialty finishes including enamel, epoxy paints or powder coating. When considering specialty finishes, consultation with the coating manufacturer is essential.

As manufactured, grating panels are provided with open ends. Optional trim banding, a metal flat bar welded to the open ends of the panel, provides additional transverse stiffness and a finished architectural appearance. Banding should be specified for all removable grating panels, the closed end of a banded panel providing additional worker safety during the removal and replacement process.

Gratings subject to vehicular loads should always be specified as banded. In these applications, the band bar helps reduce impact stresses by transferring loads to adjacent bearing bars and further resists deformation caused by repetitive traffic patterns on open end gratings.

Trench banding, where the band bar is elevated above the bottom of the bearing bars, is appropriate for drainage applications. The elevated band bar allows for efficient drainage and will not trap liquids between the band bar and the grating support.

Load banding, where each bearing bar is welded to the band bar, helps distribute load throughout the grating panel. See Banding Weld Standards for specific welding practices.

Aluminum Bar Grating is lightweight, corrosion resistant, non-sparking and has an unmatched strength-to-weight ratio. Manufactured from ASTM B221, or alloy, aluminum grating is available in four distinct products, type “ADT” Dovetail Pressure Locked , type “SG” Swaged Rectangular Bar, type “SGI” Swaged “I” Bar, and type “SGF” Swaged Flush-Top and. All four products are available with bearing bar spacing ranging from 19/16″ (1-3/16″) to 7/16″ on center and with cross bars at either 4″ or 2″ on center. Rectangular bar products are manufactured with standard plain or optional serrated walking surfaces and “I” bar products are manufactured with a standard skid-resistant striated walking surface. Aluminum products are typically shipped “mill finish” with no additional treatment. For architectural applications or highly corrosive environments, supplemental anodizing, chemical cleaning or powder coat finishes are available.

Type “ADT” Aluminum Dovetail Pressure Locked Grating

Type “ADT” aluminum gratings have deep rectangular cross bars and are manufactured by inserting pre-punched bearing bars and cross bars into an interlocking configuration and deforming the cross bars under intense hydraulic pressure. The deep cross bars on type “ADT” gratings make them popular for architectural applications such as sun shades and infill panels with the deeper cross bar serving as a distinct architectural accent. Click Here* for detailed product specification information.

Type “SG” Swaged Rectangular Aluminum Grating

Type “SG” rectangular bar provides clean, crisp lines and the cross bar is fully locked within the bearing bar, slightly below the top surface. Type 19-SG-4 aluminum grating is the industry recognized standard for industrial applications with nearly 80% open area. Type “SG” gratings are available in close mesh ADA conforming spacings 11-SG-4 and 7-SG-4 which are commonly used in public areas. When specifying type 11-SG-4 for ADA applications, 3/16″ thick bearing bars must be specified.

Type “SGI” Swaged “I-Bar” Aluminum Grating

Manufactured with highly efficient “I” shaped extruded bearing bars, type “SGI” aluminum grating carries the same load as 3/16” thick rectangular bar type “SG” aluminum grating, but weighs slightly less per square foot. Additionally, the striated top and bottom flanges of the “I” bar provide enhanced skid resistance without the cost of serration.

Type “SGF” Swaged Flush-Top Aluminum Grating

Manufactured with a unique, extruded cross bar that is flush with the top surface of the bearing bars after swaging, type “SGF” aluminum grating provides an enhanced walking surface for areas subject to continuous pedestrian traffic. Available in rectangular bar with plain or serrated surfaces, type “SGF” aluminum grating is also available in ADA conforming spacings for applications located in the public way.

Stainless Steel Bar Grating is manufactured from alloy types 304, 304L, 316 and 316L and available in grating types “WS” (welded stainless grating), “DTS” (dovetail stainless pressure locked) and “SLS” (swage locked stainless). Popular for highly corrosive environments and long-lasting architectural applications, stainless steel bar gratings are available with bearing bar spacing ranging from 19/16″ (1-3/16″) to 7/16″ on center and with cross bars at 4″ or 2″ on center. Each product is available with standard plain or optional serrated surface and finish options are diverse and should be closely considered.

Type “WS” Welded Stainless Steel Grating

Our strongest and most economical stainless product, type “WS” gratings are manufactured by forge welding rectangular bearing bars and drawn cross bars. This welding process provides a positive fused intersection providing years of service under the most demanding conditions.
Type “WS” stainless gratings are available in “19 space” (1-3/16″), “15 space” (15/16″) and “11 space” (11/16″) bearing bar centers. Standard cross bar spacing is 4″ on center and the optional 2″ cross  bar spacing is also available.  

Click Here* for detailed product specification information.

Anchor

 – A device by which grating is attached to its supports

Band

 – A flat bar welded to the end of a grating panel, or along the side of a cutout, and extending neither above nor below the bearing bars.

Load Carrying Band

 – A band used to transfer load between bearing bars.

Trim Band

 – A band which carries no load, used primarily for appearance and closing open ends.

Bearing Bars

 – Load-carrying main elements made from steel, aluminum or stainless steel, extending in the direction of the grating span

Bearing Bar Centers

 – The distance center-to-center of the bearing bars.

Carriers

 – Flats or angles which are welded to the grating panel and nosing of a stair tread and are bolted to a stair stringer to support the tread.

Clear Opening

 – The distance between faces of bearing bars in rectangular gratings, or between a bent connecting bar and a bearing bar in a riveted grating.

Cross Bars

 – The connecting bars which extend across the bearing bars, usually perpendicular to them. The may be bent into a corrugated or sinuous pattern and, where they intersect the bearing bars, are welded, forged or mechanically locked to them.

If you are looking for more details, kindly visit Shunbo Steel Grating.

Pressure-Locked Grating

-Pressure-locked means bearing bars are locked in position by cross bar deformation instead of riveting or welding. Several proven methods include:
•   Expansion of an extruded or drawn tubular   cross bar;
•   Extruded cross bar deformed or swaged between bearing bars;
•   Press assembly of rectangular cross bars into slotted bearing bars.

Radially Cut Grating

 – Rectangular grating which is cut into panels shaped as annular segments, for use in circular or annular areas.

Reticuline Bar

 – A sinuously bent connecting bar extending between two adjacent bearing bars, alternately contacting and being riveted to each.

Rivet Centers

 – The distance center-to-center of rivets along one bearing bar.

Riveted Grating

 – Grating composed of straight bearing bars and bent connecting bars, which are joined at their contact points, by riveting.

Serrated Grating

 – Grating which has the top surfaces of the bearing bars or cross bars, or both, notched.

Cross Bar Centers

 – The distance center-to-center of the cross bars.

Curved Cut

 – A cutout following a curved pattern.

Cutout

 – An area of grating removed to clear an obstruction or to permit pipes, ducts, columns, etc. to pass through the grating.

Electro-Forged

 – A process of combining hydraulic pressure and heat fusion to forge bearing bars and cross bars into a panel grid.

Finish

 – The coating, usually paint or galvanizing, which is applied to the grating.

Flush-Top Grating

 – A type of pressure-locked grating in which the cross bars and bearing bars are in the same plane relative to the top surface of the grating.

Grating

 – An open grid assembly of metal bars, in which the bearing bars, running in one direction, are spaced by rigid attachment to cross bars running perpendicular to them or by bent connecting bars extending between them.

Hinged Panel

 – Grating panels which are hinged to their supports or to other grating parts.

I-Bar

 – An extruded aluminum bearing bar having a cross section shape of the letter “I”.

Length

 – Refer to Span of Grating

Nosing

 – A special “L” section member serving as the front or leading edge of a stair tread, or of grating at the head of a stair.

Span of Grating

 – The distance between points of grating support, or the dimension of the bearing bars in this direction.

Straight Cut

 – That portion of the cut edge or cutout of a grating which follows a straight line.

Swaging

 – A method of altering the cross-section shape of a metal bar by pressure applied through dies.

Toe Plate

 – A flat bar attached against the outer edge of a grating or rear edge of a tread, and projecting above the top surface of the grating or tread to form a lip or curb.

Tread

 – A panel of grating having carriers and a nosing attached by welding, and designed specifically to serve as a stair tread.

Welded Grating

 – Grating in which the bearing bars and cross bars are joined at their intersections by either electro-forging or conventional hand welding.

Width

 – The overall dimension of a grating panel, measured perpendicular to the bearing bars, and in the same direction as the cross bars.

For more information, please visit bearing bar grating.