Mobile Solar Light Tower Installation Guide
Outdoor solar lighting systems utilize solar cells that convert sunlight into electricity, with the power stored in batteries for evening use. The TEMPO mobile solar light towers paired with SUNLIKE solar lights provide an easy installation process and require minimal maintenance. Utilizing these systems eliminates the need for trenching, extensive wiring, and electricity costs.
Essential Guidelines
To ensure optimal battery health during storage, fully charge the batteries every four months. It is crucial to install the light fixture in a location that receives ample sunlight, specifically a minimum of 3.5 hours of direct sun daily. Choose the appropriate operating mode according to your local regulations and prevailing sunlight conditions. Ensure that the light fixtures are positioned away from shadows for maximum efficiency. Self-cleaning occurs when the light is tilted at an angle of at least 15 degrees from the horizontal plane. Keep this guide for your records. Prior to installation or wiring, carefully review all instructions provided. Under no circumstances should you attempt to open or repair the SOL TECH light fixture, as doing so could result in significant damage and invalidate your warranty. For installation inquiries, please reach out to your local distributor. The effective range of the lighting fixture is between 20-26 feet (6-8 meters), with a recommended spacing of less than 16 feet (5 meters) between fixtures. When mounting multiple fixtures on a single pole, ensure that you select the desired operating mode before installation to prevent any potential delays or operational issues with the remote control due to radio frequency interference.
Precautions during Solar Panel Installation
When exposed to sunlight, the solar panel generates voltage at its output terminals, which can pose a risk of electric shock. To mitigate this danger, cover the solar panel with an opaque material such as paper or cloth during the installation process. Avoid touching the terminals while the panel is exposed to sunlight or other light sources.
Mobile Solar Light Tower Installation and Wiring Guidelines
Ensure that all installation and wiring practices adhere to local and national electrical codes. The SUNLIKE 20W/30W/30W PRO models are designated for outdoor use only. They must not be installed in areas lacking ventilation and should be placed within the temperature conditions specified by the product documentation. To ensure proper operation, the location of installation should offer an average of more than 3.5 hours of sunshine each day, avoiding shaded areas to enhance functionality.
Prior to installation, confirm that the light pole and its foundation are robust enough to support the lighting equipment securely. Ensure that the battery is fully charged before beginning the installation. If possible, perform the installation on a clear, sunny day. Before setting up, check the remote control by pressing the ON/OFF button to confirm if the indicator light shows red. Cover the solar panel, and within one minute, verify that the light module illuminates correctly.
After successful installation, the light will automatically engage at dusk and deactivate during daylight hours. Important: Always orient the solar panel towards the equator (for instance, south in the northern hemisphere). Maintain a minimum tilt angle of 15 degrees to prevent dust accumulation (0 degrees indicates a flat position).
Comments
0