SAE100 R1AT Hydraulic Hoses: Specifications, Applications, and Selection Guide

SAE100 R1AT is a hydraulic hose type with one steel-wire braid reinforcement, designed for conveying compatible hydraulic fluids in pressure systems. Buyers should confirm the hose’s working pressure, inside diameter, temperature range, bend radius, fluid compatibility, and fitting connection against the product datasheet and application requirements. The SAE designation helps define the hose type, but it does not replace checking the ratings of the exact size and assembly you plan to use.

Click here to get more.

This guide explains the construction and common uses of SAE100 R1AT hydraulic hoses, then offers a practical framework for comparing products and suppliers. We also outline the purchasing details to confirm before requesting a quotation from Hengshui Xinchi Hose Manufacturing Co., Ltd.

Who This Guide Is For

This guide is for equipment manufacturers, maintenance teams, hydraulic-system integrators, distributors, and importers evaluating hose for industrial or mobile machinery. It is especially useful when a project specifies SAE 100R1AT or when you need to check whether a one-wire-braid hose is suitable for a particular line. Final selection should be based on the system design and verified product data, not on the hose name alone.

What Is an SAE100 R1AT Hydraulic Hose?

SAE100 R1AT is commonly used to describe a hose built with an oil-resistant synthetic-rubber tube, a single braid of high-tensile steel wire, and a synthetic-rubber outer cover. The reinforcement helps the hose withstand hydraulic pressure, while the tube and cover are selected for their intended contact and environmental conditions. The “one-wire” description refers to the reinforcement construction; it is not a pressure rating.

In procurement documents, buyers may encounter variations in spelling such as SAE 100R1AT, SAE100 R1AT, or R1AT. Ask the supplier to identify the applicable standard and provide a technical datasheet, because similar names do not guarantee identical dimensions, performance, or quality controls. Confirm that the quoted construction and ratings meet your project specification.

Construction, Materials, and Key Specifications

How the Hose Is Built

Inner tube: Typically synthetic rubber selected for compatibility with the specified hydraulic fluid.
Reinforcement: One braided layer of steel wire, providing pressure reinforcement for the hose design.
Outer cover: Synthetic rubber intended to protect the reinforcement from external exposure and wear within its stated limits.

Material formulations and cover finishes can vary by manufacturer. If the hose will encounter abrasion, outdoor exposure, oil mist, or other demanding conditions, tell the supplier how it will be installed and used. Do not assume that a standard rubber cover is suitable for every chemical, temperature, or mechanical hazard.

Specifications to Check Before Ordering

Specification	Why It Matters	What to Confirm
Inside diameter	Affects flow capacity and compatibility with the system connection.	Nominal size and dimensional tolerance in the supplier’s datasheet.
Working and burst pressure	Determines suitability for normal operation and pressure-related design requirements.	Ratings for the exact hose size and assembly, not a general R1AT figure.
Temperature range	Heat and cold can affect hose materials and service life.	Limits for the intended fluid, ambient conditions, and duty cycle.
Minimum bend radius	Excessive bending can stress the reinforcement and shorten service life.	The minimum radius for the chosen size and installation layout.
Fluid and fitting compatibility	Contact materials and end connections must suit the complete system.	Fluid type, fitting standard, thread, sealing method, and assembly requirements.

Common product references for R1AT hoses state an operating temperature range of approximately −40 °C to +100 °C, with lower upper limits potentially applying to particular fluids or constructions. For water-based fluids such as water-glycol, product guidance may specify a maximum near +70 °C; confirm the exact limit with the manufacturer. These are general reference points, not a substitute for the current datasheet for the hose being purchased.

With competitive price and timely delivery, Hengshui Xinchi Hose Manufacturing Co., Ltd. sincerely hope to be your supplier and partner.

Applications and Hose Matching

SAE100 R1AT hoses are commonly considered for hydraulic lines on industrial equipment, agricultural machinery, construction equipment, and general-purpose hydraulic systems. Whether the hose is suitable depends on operating pressure, fluid, temperature, movement, routing, and exposure to the surrounding environment. The same hose type may be appropriate in one circuit and unsuitable in another.

Match the Hose to the Operating Conditions

Identify the fluid. Provide its exact type and any relevant formulation details. Check tube compatibility and consider whether the fluid is petroleum-based, water-based, or another hydraulic medium.
Establish the pressure requirement. Record normal operating pressure and any known pressure fluctuations or surge conditions. Compare these requirements with the rating for the exact size and hose assembly.
Check temperature and environment. Include fluid temperature, ambient temperature, outdoor exposure, and contact with oils or abrasive surfaces. Ask about protective measures if the installation presents unusual exposure.
Plan the routing. Confirm inside diameter, hose length, bend radius, movement, and clearance from hot or moving components. Avoid twisting the hose during installation.
Specify the end connections. State fitting type, thread, sealing method, orientation, and assembly length. Compatibility at the hose ends is essential to a usable finished assembly.

For example, a hydraulic return line and a high-pressure working line may have different requirements even when both use the same fluid. Likewise, a line routed through a tight enclosure may need a different size or layout to respect bend-radius limits. Evaluate each circuit on its own operating data rather than selecting by equipment category alone.

Buyer Selection and Sourcing Framework

Common Selection Mistakes

Assuming “R1AT” alone confirms a hose’s pressure rating for every diameter.
Using a hose above its stated temperature or pressure limits.
Ignoring fluid compatibility, bend radius, or abrasion exposure.
Ordering by nominal size without confirming fittings and connection details.
Mixing hose and fittings without verifying that they are designed for the same assembly.

To reduce these risks, provide a written specification with the operating conditions and connection details. Request the manufacturer’s datasheet for the proposed size, together with the applicable inspection or quality documentation available for that order. If a requirement is unclear, ask the supplier to identify the assumption before production or shipment.

Price, MOQ, and Lead Time

Pricing for SAE100 R1AT hose can depend on diameter, construction, order quantity, packaging, requested documentation, and delivery destination. Minimum order quantity and lead time are supplier- and order-specific, so they should be confirmed during quotation rather than assumed from the product category. For a fair comparison, ask each supplier to quote against the same technical specification and delivery terms.

Supplier Evaluation Checklist

Can the supplier provide a datasheet for the exact size and construction?
Are working pressure, temperature limits, and bend radius clearly stated?
Can the supplier clarify fluid compatibility and suitable fittings?
Are MOQ, production lead time, packing, and shipping terms stated in the quotation?
Can requested product or order documentation be confirmed before purchase?

Hengshui Xinchi Hose Manufacturing Co., Ltd. supplies rubber hose products and can discuss SAE100 R1AT requirements with B2B buyers. For a focused quotation, share the intended hose size, required quantity, fluid, pressure, temperature, hose length, fittings, and destination. We can then clarify product availability and the technical details that should be confirmed for your application.

Key Takeaways

SAE100 R1AT generally describes a hydraulic hose with one steel-wire braid reinforcement.
Pressure capability varies by size and product; do not infer a rating from the designation alone.
Confirm fluid compatibility, temperature, bend radius, fittings, and installation conditions.
Use the exact product datasheet and a complete written specification to compare suppliers.

Conclusion and Next Steps

SAE100 R1AT can be a suitable option for hydraulic systems that match the hose’s verified construction and ratings, but the designation alone cannot determine fit for a specific line. Start by documenting pressure, fluid, temperature, size, routing, and fittings, then compare those requirements with the datasheet for the exact product. This is the most reliable way to assess applications and avoid a mismatch during purchasing.

For your next step, prepare the application details and request a quotation with the required size, quantity, connection information, and delivery destination. Contact Hengshui Xinchi Hose Manufacturing Co., Ltd. to discuss your SAE100 R1AT hose requirements and confirm the product information relevant to your project.