WHAT IS AN AMPHIBIOUS EXCAVATOR? - YUTANI

An amphibious excavator is a type of excavator that features sealed pontoon equipment that allows it to perform dredging work while floating in shallow water. The pontoons are built with high tensile strength steel, due to the working conditions they are in, they are resistant to corrosion and able to work in high salinity conditions as in the case of working with seawater. This ensures that the excavator can operate even in extreme conditions. It is equipment that is specifically designed to maneuver in swampy areas such as wetlands and soft ground, as well as to float on water. These excavators are fully self-propelled using a direct drive guide hydraulic system.

YuchaiHI contains other products and information you need, so please check it out.

The physical principle that makes the amphibious excavator possible lies in the hermetically sealed pontoons, which are designed under the Archimedean principle. Coupled with its large footprint, this creates really low ground pressure. The machine is capable of operating within dry, soft, and boggy areas with little or no risk of being trapped in mud.

Undercarriages are considered as one of the main innovations in the area of the construction industry. These excavators are capable of operating in the harsh wetlands that are common throughout the world, especially in North America and Europe. Commonly, engineers were limited to conducting operations on solid ground, so under these conditions they would have to figure out how to generate solid ground for these machines by building roads or introducing barges through canals. Because these wetland-related overhead costs were required to be reduced, engineers developed the amphibious landing gear. The amphibious undercarriage could be installed on excavators and other heavy work equipment, adhering the undercarriage gives it buoyancy and the ability to work in wet environments without the need to build a solid base to transport it.

Amphibious equipment modifications are ideal for safely transporting workers and equipment to job sites on terrain that is too soft to walk and too dense to float. Before the use of amphibious excavators, developing industrial projects required workers to build canals, roads, or platforms before operating heavy equipment in swamps and marshes. This extra point for adapting the equipment to the working conditions was not only very extensive and difficult, but it was also very expensive and really harmful to the local environment because they were usually wetlands and swamps with a fragile ecology. On the other hand, these roads and channels were necessary to support loads of large machinery in soft or wet terrain, so sometimes they were not unnecessary work, but it was very limiting. Using amphibious excavators the procedure is much simpler, many steps can be eliminated by driving the machinery directly to the job site.

The most notable feature of the amphibious undercarriagethat sets the equipment apart from a common excavator is the fact that it can provide buoyancy through hermetically sealed pontoons. The pontoons, which are extendable, allow the excavator to float in the water with the option of mounting vertical pallets if there is no different uneven terrain on which there is a risk of operation. The movement is carried out by means of the chain of chains that uses a multisynchronous hydraulic drive system. The track chain is used to support flotation, provides a higher level of traction efficiency and stability over a wider range for all types of operations, that is, according to ground conditions. The excavator can adapt with different attachments for each application. Due to this ability, it is possible for operators to perform a wide range of tasks for different industrial applications.

By common sense it is known that amphibious equipment will be useful to be used around wetlands and swamps, however, there are many other scenarios and conditions in which using amphibious equipment allows the job to be easier. The projects that are carried out around oceanic coasts, riverbeds and especially in areas of recent floods in which using an amphibious excavator is the best option to save costs and optimize operating time. Amphibious excavators can function efficiently in a wide range of applications, including flood and disaster recovery efforts, dredging, environmental remediation, and various construction projects such as pipeline, levee, or highway laying.

Using amphibious excavators is also the best option for environmental dredging, so its use is not only limited to the construction area. Dredging tasks are sometimes hampered by shallow water depths because excavators can easily get stuck or have limited reach. Due to the versatility of amphibious equipment that can float on water and can be handled on land, the operator does not have to worry about operating either too close or too far from the water’s edge. The wide tracks and a convenient weight for the operation mean that the pressure on the ground is not excessive, on the other hand, a much heavier equipment causes deep furrows. Additionally, the ability to mount a dredge pump directly to the excavator gives it the ability to have optimal movement and production rates.

All types of excavation dredging in shallow water areas, which are considered up to 9 meters, should be done with an amphibious excavator. The removal of mud or stones, the transformation of warehouse spaces or the cleaning of industrial waste ponds are the most common applications, generally they are more used in environmental control aspects.

The sediments that accumulate at the bottom of the inlet channels and the dam reservoir of the hydroelectric power plant can be dredged to maintain sufficient flow for the plant operations, and especially to take care of the internal equipment of hydroelectric power plants, it is a type of preventive maintenance.

Aquatic vegetation that grows at the bottom of the river or lake can be removed with an amphibious excavator and a rake. It is possible to also remove the roots of the plant and thus prevent the plants from growing again. If necessary, special hydraulic tools can be used to cut. As a complement, a conveyor belt and a cutter can be used, for some cases, especially for invasive plants.

The undercarriage is an essential part of understanding the operation of the amphibious excavator. It is a multi-equipment supporting structure, the amphibious hydraulic landing gear has to develop various supporting functions. In the case that it is equipped with a trencher, it will serve as an integral piece of equipment in controlling insects, especially mosquitoes, as well as digging trenches for laying pipes, for example. When using the amphibious hydraulic undercarriage, it can traverse swampy and wet terrain with partial flooding, terrain that would complicate the operation of a traditional excavator. Similarly, in the case that it is equipped with a large crane, the crane has the ability to operate on a variety of terrain, this aspect is ideal for construction jobs that have various types of working floors.

With respect to the structural plane, amphibious excavators have a design very similar to that of a conventional excavator, they can provide 360-degree turns while keeping the undercarriage fixed, they have an arm, boom, operating cabin, counterweight, etc. The specific difference lies in the undercarriage, which in the case of being an amphibious excavator is equipped with hulls or pontoons that resemble those of a boat to maximize traction and provide buoyancy to the equipment.

1.- The equipment used for use in shallow waters tends to move in a conventional way using only the undercarriage with pontoons, which reduces the pressure on the ground due to the width of the tracks and their greater contact surface, maximizing team traction.

2.- Used for use in deep waters: They can be moved supported by the arm and boom of the excavator. To minimize the risk of overturning during operation, it is common to generally add an extra set of side pontoons, which include the so-called “spuds” or retention pillars, which are responsible for keeping the equipment in a zone. of specific work providing stability to the equipment because they improve the penetration to the ground.

3.-Used for use in deep waters supported by propellers: Their design is like that of equipment for deep waters, they are equipped with an additional set of pontoons, however, a propeller mechanism is implemented in the side hulls that will be the in charge of supporting the movement compared to that supported by the arm and boom.

The company is the world’s best Amphibious excavator manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Spud, like its hydraulic mechanism built into the sealed vise pontoons, must be assembled on both sides of the amphibious excavator. The tip legs are controlled by hydraulic power for lying down and positioning. The length of the trowel legs is determined by the depth of the water in the work area. Before the excavator begins its production stage, you need to lift the tip legs and then turn on the hydraulic mechanism to insert the legs into the underwater mud. The Spud system is a great accessory because it greatly improves the underwater operational stability of the machine.

The extended boom is designed to meet the demand of large construction projects. The operating radius, height, and width of digging when using an extended boom increase the operating limit which serves to meet specific working conditions. Mainly the use of the extended boom does not represent any risk to the equipment, we can ensure the stability and safety of the work of the whole excavator by using an extended boom.

The amphibious pontoon is made of A36 steel, which is a special material for boats, and also of high-strength aluminum plate. Pontoons are shot blasted to make sure the surface is completely clean, free of contaminants and oxides. In addition, this process presents the steel with a surface texture that provides excellent adhesion of the first coat of paint, facilitating the painting process. Responsible structure design and finite element analysis of job site destructive testing greatly ensure that amphibious pontoons have adequate load capacity and safety.

The track chains and rollers of the amphibious pontoons are made of 40Cr, while the medium sleeves are made of a super wear-resistant material 20CrMnTi, due to this the sleeves have a high service life. The special three-track design will decrease the tension on each track and average the tension on the track shoes so that the track is more efficient. The main advantage is that the entire machine will have the ability to continue moving to the repair station after one of the chains breaks, which contributes significantly to reducing repair and maintenance costs during work. Also, all Amphibious Excavator Pontoon Track Chains have a rowing device, which can effectively improve the load capacity of the whole machine in the water.

After the chains meet a reasonable wear time, which also depends on the operation, the chain pitch will be enlarged using the track pin, causing a slip or fall of the track. chain, which represents a great risk to work performance. The chain tensioning device will perform an adjustment of the chain wheel position to make sure that the chain pin and the drive gear have a perfect match to avoid problems. Bolt tensioning is the optimal configuration for the amphibious pontoon. In addition, there is an easier to maneuver tensioning system that you can employ: oil cylinder tensioning, with which the tensioning force can achieve a balance adjustment to make the entire operating system optimal, efficient, and safe.

This accessory provides greater autonomy to the operator. It means that the space of the 2 pontoons can be freely adjusted by the operating system within a certain range. There is a hydraulic control system on the connected beam of the two pontoons, which can be easily operated. In the case that the workspace in which to operate is a very narrow area, the pontoon space can be adjusted to a minimum while still operating normally. By flexibly adjusting the space between the pontoons, as a result, it can help to improve the stability of the chassis, as well as improve the overall work efficiency.

In the ever-evolving realm of construction and environmental management, amphibious excavators have carved a niche as indispensable machinery. Known for their versatility, these specialized machines are pivotal in tackling projects that involve marshy, swampy, or underwater terrains. This article delves into the different aspects of amphibious excavators, exploring their uses, varieties, material composition, cost factors, and practical tips for optimal usage.

Understanding Amphibious Excavators

Amphibious excavators are engineered to operate both on land and in water, thanks to their robust design and floatation capabilities. Unlike conventional excavators that can struggle in unstable or submerged settings, amphibious excavators are equipped with pontoons equipped with tracks that allow them to maneuver over watery and marshy conditions with ease. A typical amphibious excavator features a hydraulic excavator mounted on a base with sealed pontoons that provide buoyancy and powerful propulsion, allowing it to function efficiently in challenging environments.

Exploring the Varieties of Amphibious Excavators

While all amphibious excavators share the ability to operate in wet and unstable conditions, they vary in their design and functionality to cater to specific needs:

• Standard Amphibious Excavators: These are the most common type, suitable for a range of applications from digging and dredging to vegetation clearing in shallow and semi-aquatic environments.
• Swamp Buggy: Primarily used in extremely soft terrains, swamp buggies excel in environments where other amphibious variants might risk getting stuck. They come with broader tracks and enhanced stability features.
• Long-Reach Amphibious Excavators: Designed for areas where reach rather than buoyancy is critical, these machines have extended booms for tasks like riverbank development and canal clearing.

Materials Defining the Durability and Efficiency

Amphibious excavators are built from materials that enable them to withstand both the abrasive nature of water-based operations and the mechanical stress of traditional construction tasks. The pontoons are typically made from high-grade marine-grade aluminum or steel, providing corrosion resistance and long-term durability. The tracks are usually constructed from reinforced rubber or steel, offering flexibility and strength to navigate tough terrains. Precision hydraulic systems are integral, ensuring smooth operation and control under submerged conditions.

Decoding the Cost Factors

The cost of an amphibious excavator can vary widely based on several factors. Key considerations include:

• Size and Capacity: Larger models capable of handling more robust tasks usually command higher prices.
• Additional Attachments: Attachments such as dredging pumps or cutting heads can significantly influence cost due to their enhanced capabilities.
• Material Quality: Higher quality, corrosion-resistant materials may increase upfront costs but reduce maintenance expenses in the long run.
• Manufacturer: Models from well-known manufacturers may offer advanced features and reliability, at a premium.

Effective Usage Tips for Amphibious Excavators

Maximizing the longevity and efficiency of an amphibious excavator involves following some best practices:

• Regular Maintenance: Consistent servicing of the hydraulic system and checking for punctures or damage to pontoons can prevent unexpected downtimes.
• Operator Training: Ensuring that operators are well-trained in handling the unique movement capabilities of these machines enhances safety and operational efficiency.
• Environmental Considerations: Being mindful of the delicate environments these machines often work in is crucial; operators should ensure minimal disruption to local ecosystems.

In conclusion, amphibious excavators represent a remarkable fusion of technology and engineering, addressing the complexities of aquatic and marshy construction environments. Their ability to transition seamlessly between terrestrial and aquatic workspaces makes them invaluable in a variety of projects, providing solutions where traditional machinery may falter.

FAQs

Q: Can amphibious excavators be used in marine construction?
A: Yes, they are specifically designed to work in marine environments, making them ideal for tasks such as dredging and waterfront development.

Q: What are the main maintenance concerns with amphibious excavators?
A: Regularly inspecting the hydraulic systems, pontoons, and tracks is essential to ensure they remain in optimal working condition, especially after exposure to saline and harsh aquatic environments.

Want more information on Yuchai Power Generator? Feel free to contact us.