What Should You Ask a Crusher Manufacturer Before Buying?
Before buying a crusher, ask the manufacturer to confirm that the proposed machine and complete process line match your feed material, required output, operating conditions, and maintenance capabilities. Request written answers on capacity, feed-size limits, finished-product requirements, wear parts, installation, and after-sales support. At DAHONGLI, we encourage buyers to share real operating data rather than choose equipment by model name or headline capacity alone. The right questions help you compare suppliers on suitability and total project requirements—not just purchase price.
For more information, please visit our website.
Questions to Ask Before You Request a Quote
1. How will you match the crusher to my material and application?
Describe the material you plan to crush, including its type, hardness, abrasiveness, moisture, and any variation between batches. Ask which crusher type the manufacturer recommends and why it suits your application. A jaw crusher, cone crusher, impact crusher, or another configuration may be appropriate depending on the material and the duties of each stage in the process.
Ask whether the recommendation is based on your actual feed conditions or on a general equipment description. If you can provide representative samples, material test information, or reliable site data, ask how the supplier will use them to evaluate the proposal. If information is missing, ask the manufacturer to identify the assumptions behind its selection.
2. What capacity can I expect with my feed and product requirements?
Ask for the expected throughput in tonnes per hour under conditions similar to yours, and clarify whether the figure is a design estimate or a guaranteed performance commitment. Capacity can depend on material properties, feed consistency, crusher settings, and the configuration of the wider plant. A rating without those conditions may not be meaningful for comparing quotations.
State your feed-size range and target product sizes, then ask the manufacturer to confirm whether the proposed equipment can meet both requirements together. For example, a preliminary inquiry might specify a target of 120 tonnes per hour, a maximum feed size of 600 millimetres, and a desired product size of 20 millimetres. These figures are an example of how to describe a project, not a recommendation or a performance claim for a particular machine.
3. What product grading and adjustments can the machine provide?
Ask how the crusher setting affects product size and what adjustments operators can make during production. If your project requires more than one product fraction, clarify whether the proposed arrangement can produce them and whether additional screening or recirculation is needed. Request a clear explanation of expected product grading, including any conditions or limitations used in the estimate.
Also ask how changes in feed material or operating settings may affect product shape and output. This is particularly important when the specification is based on a customer or downstream process requirement. Confirm which performance details can be verified during commissioning and how any acceptance criteria will be documented.
Check the Full Technical and Commercial Scope
4. What equipment and services are included in the quotation?
A quotation should make it possible to see what you are buying and what remains your responsibility. Ask whether the scope includes only the crusher or also supporting equipment such as feeders, screens, conveyors, electrical controls, guarding, and structural components. Confirm the proposed configuration, major specifications, and any exclusions in writing.
Clarify the commercial terms as well. Ask about the price basis, payment schedule, packaging, shipping responsibilities, delivery location, and estimated lead time. If installation or commissioning is offered, ask what those services cover, what your site must provide, and whether travel or other costs are separate.
5. Which wear parts and maintenance tasks should I plan for?
Ask for a recommended list of wear parts, consumables, and critical spares for the proposed machine. Request part numbers, material descriptions, and guidance on how to identify compatible replacements. The manufacturer should explain which parts are subject to wear and what operating factors can influence inspection or replacement intervals, rather than promise a fixed service life without project-specific evidence.
Ask what routine checks and maintenance procedures operators should follow, and whether manuals, drawings, and training are included. Find out how the supplier handles technical questions and parts inquiries after delivery. For a remote or demanding site, discuss your spare-parts strategy before ordering so that responsibilities and expected support arrangements are clear.
Goto DAHONGLI to know more.
6. What site, power, and safety requirements must I meet?
Request the machine’s electrical, foundation, layout, and operating requirements for your proposed configuration. Confirm the required power supply, control interfaces, access clearances, lifting arrangements, and any site utilities that your team must provide. Ask for the relevant drawings early enough for your engineering team to review them before installation planning is complete.
Discuss guarding, emergency stops, safe access for inspection, and the procedures needed to isolate equipment for maintenance. Requirements vary by machine, site, and applicable local rules, so ask the supplier to state the design provisions and documentation included in its scope. Your own project team should confirm that the final installation complies with the rules applying at the operating location.
Evaluate the Manufacturer, Not Just the Machine
7. How do you demonstrate that the proposal fits my project?
Ask the manufacturer to explain the basis for its equipment selection and identify any assumptions about material, capacity, and product size. Request a process layout or equipment list if your purchase is part of a larger crushing line. Check that the proposal addresses the feed and discharge interfaces, rather than treating the crusher as an isolated item when surrounding equipment affects operation.
Where performance commitments matter, ask how they will be measured, under which operating conditions, and what documentation will form part of the agreement. Distinguish clearly between estimated results, design parameters, and contractual guarantees. If a supplier cannot substantiate a claim for your conditions, ask what information or testing would be needed to assess it.
8. What support is available after delivery?
Ask who will answer technical questions, what support channels are available, and whether remote assistance, operator training, or site services are included or optional. Confirm the process for ordering parts and reporting a service issue, along with any stated response arrangements. Avoid assuming that support is included simply because a supplier describes itself as a manufacturer.
Review the warranty terms carefully, including the covered components, exclusions, claim process, and conditions that could affect coverage. Ask which documents are supplied with the machine, such as operating instructions, maintenance guidance, and parts information. These details help your team plan ownership responsibilities before the equipment reaches the site.
Common Mistakes to Avoid
- Choosing on price alone: Compare the equipment scope, exclusions, spares, delivery terms, and support as well as the quoted price.
- Using a single capacity figure: Check the material and operating conditions behind the stated throughput.
- Leaving product requirements vague: Specify target sizes, grading needs, and any downstream constraints.
- Assuming site compatibility: Verify power, layout, foundation, access, and safety requirements before ordering.
- Relying on verbal assurances: Put important specifications, responsibilities, and performance conditions in the written proposal or contract.
Buyer Summary: A Practical Supplier Checklist
Before choosing a supplier, make sure you can answer these questions: Does the manufacturer understand your material and application? Is capacity explained for your actual operating conditions? Are feed limits, product requirements, and equipment scope clearly stated? Have you confirmed wear parts, maintenance, site needs, lead time, warranty, and after-sales support?
Compare proposals using the same project information and ask each supplier to disclose assumptions and exclusions. A useful inquiry includes material details, feed-size range, target capacity, desired product sizes, operating environment, and site constraints. If any requirement is not yet confirmed, mark it as an open item rather than allowing it to become an unstated assumption.
Conclusion: Ask for a Project-Specific Proposal
The most important questions to ask a crusher manufacturer concern material suitability, realistic capacity, product grading, complete scope, maintenance, site requirements, and support after delivery. Ask the supplier to explain how its recommendation fits your conditions and to put key specifications and responsibilities in writing. This gives your team a clearer basis for evaluating technical fit and commercial risk before making a purchase.
At DAHONGLI, we invite mining and aggregate buyers to share their application details and project requirements for discussion. Send your material information, target output, desired product sizes, and site constraints when requesting a proposal. We can then discuss a suitable equipment configuration and clarify which technical or commercial details need confirmation before you proceed.

Comments
0